Item: Microfilter & Splitter for ADSL Lines
Item code: M-ADSL-FILTER-Y
Download PDF file
The De-Facto standard for ADSL Microfilters in the UK!
The Dynamode M-ADSL-FILTER-Y is a full UK standard spec ADSL Microfilter for BT exchanges within the UK.
Featuring high-performance circuits to keep telephone conversations at high quality and at the same time maintain optimum ADSL line speeds all the way up to ADSL2 8 Mbps specifications.
Ask about our new ADSL2+ 24Mbps Microfilters.
All requirements for this specification can be met in the presence of all POTS loop currents from 0 mA to 100 mA. This Single In-Line filter can pass POTS tip-to-ring DC voltages of 0 V to 105 V and ringing signals of 40 Vrms to 150 Vrms at any frequencies from 15.3 Hz to 68 Hz superimposed on DC voltages in the range from 0 V to 105 V. The DC resistance from tip-to-ring at the line port interface with the phone interface shorted, shall be less than or equal to 50 ohms for one filter. The DC resistance from tip-to-ground and from ring-to-ground at the Phone interface with the Line interface open shall be greater than or equal to 10 Megohms. The ground point shall be local building or green wire ground. As an objective, the DC resistance should exceed 10 MW.
TYPICAL APPLICATIONS INCLUDE
ADSL –Wireless LAN Router
ADSL –Wireless Access Point
ADSL –Wireless Bridge
|WAN ADSL Interface
||Sync. Rate: up to 8Mbps for download and up to 1M for upload
Connection Loop: 2-wired twisted copper pair
Connector: One RJ-11
||10/100 Mbps Full-duplex, Auto-sensing Ethernet Port
Connector: One RJ-45
|Console Port, RS-232
||Communication mode: 9600, N, 8, 1
Connector: DB9 male
||AC Adapter: Input 110 or 230 or 240 VAC, 50/60Hz; Output: 5VDC, 2.6A
Power Consumption: Less than 8 Watts
||Temperature: 0 ~ 45
Humidity: 5% ~ 95%, Non-condensing
||EMC: CE&FCC Class B
||ATM Cell over ADSL, AAL5
Support UBR, CBR, VBR-rt and VBR-nrt
VPI Range (0-4095) and VCI Range (1-65535)
Up to 8 ATM VCs
Support OAM F4/F5 loopback
- RFC2684 (formerly RFC1483), Multi-Protocol over ATM (MPoA)
- RFC2225 (formerly RFC1577), IPoA
- RFC2364, PPP over ATM (PPPoA)
- RFC2516, PPP over Ethernet (PPPoE)
||Transparent Bridging (IEEE 802.1D)
RFC2684 (formerly RFC1483) Bridged Mode
||RFC2684 (formerly RFC1483) Routed Mode
TCP/IP with RIP-1/RIP-2 and static IP routing
Multiple Application-Level Gateway (ALG) Algorithms Supported
||Local Password Protection
IP Packet Filtering
PPPoE and PPPoA with PAP/CHAP/MS-CHAP
Firewall protection including Hacker attack protection (DoS), URL blocking SPI, packet filtering and others
Embedded VPN supported: PPTP client and server, IKE, and Ipsec (DES and 3DES).
||DHCP server for dynamic IP management for local stations, DHCP client in WAN site to get an IP address from service provider automatically.
Local configuration and management through RS-232 port
Telnet for local and remote management
Web GUI for easy configuration from local or remote site
Firmware Upgrading and upload/download configuration file through TFTP and WEB GUI